The International Conference on Applied Mechanics and Mechanical Engineering

Author Index

A

A, DELIOU Optimization to the failure of laminated composites with different provisions of reinforcement [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 47-53]
A, HASSAN M.F. AN INVESTIGATION OF THE EFFECT OF WORKING GAS TYPE ON MORPHOLOGICAL FEATURES OF THE DEPOSITED LAYERS ON A STEEL ALLOY PRODUCED BY IMPULSE PLASMA DEPOSITION TECHNIQUE [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 100-114]
A, YEAKUB M. EFFECT OF SIZE AND SHAPE OF ELECTRODES ON THE PERFORMANCE OF EDM [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 17-25]
A., ABD EL-LATIEF M. STUDY OF VEHICLE CRASHWORTHINESS APPLYING COMPOSITE MATERIALS (FRONTAL AND OFFSET IMPACT) [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 104-117]
A., ABD. SALAM M. CHANGE IN MICROSTRUCTURE AND HARDNESS OF TI-6%AL-4%V ELI ALLOY ON TEMPERING PROCESS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 159-165]
A., ABOEL-HASSAN INPUT SHAPING TECHNIQUES FOR LIQUID SLOSH SUPPRESSION [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 105-117]
A., ABOURAHMA A. EFFECTS OF OSCILLATORY PLUNGING MOTION ON ROTARY WING BLADES [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 314-323]
A., AFIFI A. FEATURE RECOGNITION TECHNIQUE FOR TURNING OPERATION [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 121-134]
A., AHMED COMPUTER SIMULATION OF BLANKING PROCESS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 68-80]
A., AKROUT INFLUENCE OF THE VISCOTHERMAL EFFECTS ON THE VIBROACOUSTIC BEHAVIOR OF A DOUBLE PLATES SYSTEM [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 68-80]
A., ALI HIGH TEMPERATURE FATIGUE BENDING PROPERTIES OF LOW CARBON STEEL [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 84-95]
A., ALI THE MECHANICAL DESIGN AND CONSTRUCTION OF A TRUCK-MOUNTED SCATTEROMETER PLATFORM [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 23-28]
A., AL-QAISIA A. NON-LINEAR FORCED VIBRATION OF A TAPERED CANTILEVER BEAM [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 1-11]
A., ARFAH INVESTIGATION OF LOW END TORQUE DIP PROBLEM OF CAMPRO 1.6L ENGINE [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 39-53]
A., AVCI FATIGUE CRACK GROWTH OF STAINLESS STEEL FIBER REINFORCED ALUMINUM COMPOSITES [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 34-46]
A., BALABEL STUDY OF THERMOCAPILLARY EFFECTS IN TWO FLUID SYSTEMS USING A SINGLE PHASE MODEL [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 67-91]
A., BASALAH A. FRACTURE BEHAVIOR OF THE POLYMETHYL METHACRYLATE WITH TWO DIFFERENT CURING PROCESSES [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 117-127]
A., BECHEUR A POSTERIORI ERROR INDICATOR FOR COULOMB’S FRICTIONAL CONTACT [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 74-86]
A., BECHEUR MODELISATION OF THERMOELASTIC LINEAR BEHAVIOUR OF TUNGSTEN FILAMENTS IN TWIN HELICAL SPRING CONFIGURATION [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 128-143]
A., BENALLEGUE NONLINEAR ∞ H CONTROL OF A QUADROTOR UNMANNED AERIAL VEHICLE [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 48-57]
A., BENNANI A NEW ENGINEERING METHOD FOR FUZZY RELIABILITY ANALYSIS OF SURGE CONTROL IN CENTRIFUGAL COMPRESSOR [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 106-116]
A., BIN AYOB NUMERICAL INVESTIGATION OF FATIGUE LIFE ON OPTIMUM AUTOFRETTAGED PRESSURIZED THICK-WALLED CYLINDERS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 1-17]
A., BIN AYOB NUMERICAL INVESTIGATION OF FATIGUE LIFE ON OPTIMUM AUTOFRETTAGED PRESSURIZED THICK-WALLED CYLINDERS. [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 1-17]
A., CONCETTI MODELLING AND COMPARISON OF DIFFERENT DESIGN SOLUTIONS AND EXPERIMENTAL RESULTS FOR DC TRANSFERRED ARC PLASMA CUTTING TORCHES [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 73-83]
A., ELBESTAWI M. MACHINING PROCESS PLANNING THROUGH LATENT VARIABLE MODEL INVERSION [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 135-155]
A., EL-HAKIM M. FEATURE RECOGNITION TECHNIQUE FOR TURNING OPERATION [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 121-134]
A., El-HENDAL Y. EXPERIMENTAL AND NUMERICAL INVESTIGATIONS OF FORCED CONVECTION OVER AN INCLINED HEATED FLAT PLATE [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 334-348]
A., ELKADY E. EVALUATION OF CO-GENERATION AND TRI-GENERATION SYSTEMS EMPLOYING RECIPROCATING AND GAS TURBINE ENGINES FOR POWER GENERATION [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 176-198]
A., EL-KADY E.A. A COMPARISON BETWEEN FLOWS OF THREE REACTION SYSTEMS THROUGH SUPERSONIC PROPULSIVE NOZZLES [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 158-175]
A., ELSENBAWI M. IMPLEMENTATION OF ELECTRO-HYDRAULIC SERVO-VALVE FOR MODULATION OF THE ROCKET THRUST [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 117-132]
A., El-SHAFEI M. FINITE ELEMENT MODEL OF A SMART ISOTROPIC BEAM WITH DISTRIBUTED PIZOELECETRIC ACTUATORS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 242-258]
A., ELSHAFEI M. FINITE ELEMENT ANALYSIS OF COMPRESSOR BLADES UNDER EXTENSION, BENDING, AND TORSION LOADS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 177-195]
A., ELTANTAWIE M. NON-PARAMETRIC MODEL FOR EMULATING MAGNETORHEOLOGICAL DAMPER BEHAVIOR [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 44-54]
A., FARRAEN M. INVESTIGATION OF LOW END TORQUE DIP PROBLEM OF CAMPRO 1.6L ENGINE [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 39-53]
A., FAYEK M. EXPERIMENTAL AND NUMERICAL INVESTIGATIONS OF FORCED CONVECTION OVER AN INCLINED HEATED FLAT PLATE [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 334-348]
A., FILIPPONE EXPERIMENTAL AND COMPUTATIONAL INVESTIGATION OF THE AERODYNAMICS OF A SUPERSONIC PROJECTILE WITH STREAMWISE SLOTS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 285-313]
A., GHAZY M.R. DETECTING STICK-SLIP OCCURRENCE BY NEAR FIELD NOISE MEASUREMENTS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 39-49]
A., GUHA SILVER TOUGHENED ALUMINA CUTTING TOOL INSERTS: PERFORMANCE EVALUATION USING DYNAMIC COMPONENTS OF CUTTING FORCE SPECTRA [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 35-47]
A., HADJI EFFECT OF TITANIUM, MOLYBDENUM AND MANGANESE ON WEAR BEHAVIOUR OF HIGH CHROMIUM CAST IRON [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 138-145]
A., HAFAIFA A NEW ENGINEERING METHOD FOR FUZZY RELIABILITY ANALYSIS OF SURGE CONTROL IN CENTRIFUGAL COMPRESSOR [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 106-116]
A., HALIM THE MECHANICAL DESIGN AND CONSTRUCTION OF A TRUCK-MOUNTED SCATTEROMETER PLATFORM [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 23-28]
A., HAMADA A. DYNAMIC RESPONSE OF AN ADHASIVE BONDED JOINT FOR COMPOSITE STRUCTURE [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 83-94]
A., HAMDAN M. SIMULATION OF COMPRESSION ENGINE RUNNING ON DIFFERENT TYPES OF FUELS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 210-223]
A., HAMDAN M. SIX-PORT MODEL FOR SOUND PROPAGATION IN A POROUS MEDIA WITH APPLICATION TO DIESEL PARTICULATE FILTERS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 18-31]
A., HASSAN K.A. AN INVESTIGATION OF THE EFFECT OF WORKING GAS TYPE ON MORPHOLOGICAL FEATURES OF THE DEPOSITED LAYERS ON A STEEL ALLOY PRODUCED BY IMPULSE PLASMA DEPOSITION TECHNIQUE [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 100-114]
A., HUSSIN M. EXPERIMENTAL AND NUMERICAL STUDY OF POWDER METALLURGY PERFORMANCE FOR AUTOMOTIVE APPLICATIONS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 200-208]
A., IBRAHIM M. A SURVEY ON THE STRUCTURAL FAILURE ANALYSIS DUE TO IMPACT [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 47-73]
A., IBRAHIM EXPERIMENTAL AND COMPUTATIONAL INVESTIGATION OF THE AERODYNAMICS OF A SUPERSONIC PROJECTILE WITH STREAMWISE SLOTS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 285-313]
A., IMAM T. MODELING AND IMPLEMENTATION OF THE EGYPTIAN RAILWAYS TRACKING AND CONTROL SYSTEM [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 156-170]
A., KHAN A. EFFECT OF SIZE AND SHAPE OF ELECTRODES ON THE PERFORMANCE OF EDM [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 17-25]
A., KHAN A. EFFECT OF STRONTIUM MODIFICATION ON MACHINABILITY OF ALUMINIUM-SILICON EUTECTIC ALLOY [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 130-137]
A., KHARLAMOV Y. PULSED GASEOUS DETONATION GUNS FOR COATING DEPOSITION [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 9-20]
A., KHIDIR E. A NEW TECHNIQUE FOR ACTUATING PARALLEL MANIPULATORS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 13-24]
A., MAHMOOD K. THE MECHANICAL DESIGN AND CONSTRUCTION OF A TRUCK-MOUNTED SCATTEROMETER PLATFORM [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 23-28]
A., MEGUID S. NANO-REINFORCED COMPOSITE INTERFACES: OPPERTUNITIES AND CHALLENGES [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 38-48]
A., MILNIKOV A NEW PROCEDURE OF ROBOTS SPATIAL ROTATIONS TERMINAL CONTROL [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 1-12]
A., MOAWED M. EXPERIMENTAL AND NUMERICAL INVESTIGATIONS OF FORCED CONVECTION OVER AN INCLINED HEATED FLAT PLATE [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 334-348]
A., MOHAMED E. ANALYSIS OF LAMINATED CYLINDRICAL PRESSURE VESSELS WITH PRE-LOADS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 215-241]
A., MOKHTAR NONLINEAR ∞ H CONTROL OF A QUADROTOR UNMANNED AERIAL VEHICLE [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 48-57]
A., MORKA COMPUTATIONAL AND EXPERIMENTAL STUDY OF ENERGY ABSORPTION METTER BY COMPOSITE STRUCTURES [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 87-102]
A., MUDRIKOVÁ MATERIAL FLOW IN FLEXIBLE MANUFACTURING [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 111-120]
A., NASR COMPARATIVE STUDY OF INITIATION FATIGUE LIFE OF FREE DEFECT AND DEFECTIVE MATERIALS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 39-46]
A., NASSEF INPUT SHAPING TECHNIQUES FOR LIQUID SLOSH SUPPRESSION [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 105-117]
A., POTRZEBOWSKI IMPACT OF VARIABLE INTAKE-VALVE-TIMING ON HOMOGENEOUS CHARGE COMPRESSION IGNITION (HCCI) ENGINE PARAMETERS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 246-256]
A., RAHMAN INVESTIGATION OF LOW END TORQUE DIP PROBLEM OF CAMPRO 1.6L ENGINE [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 39-53]
A., RATEB R. IMPLEMENTATION OF ELECTRO-HYDRAULIC SERVO-VALVE FOR MODULATION OF THE ROCKET THRUST [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 117-132]
A., REVELL NUMERICAL SIMULATION OF AN IN-LINE TUBE BUNDLE USING THE URANS APPROACH [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 416-430]
A., RIZK A. THREE- LAYERED ELASTIC COMPOSITE WITH SURFACE CRACKS SUBJECTED TO CONVECTIVE COOLING [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 18-33]
A., SABER MIXED-REALITY ENVIRONMENT FOR ONLINE SYSTEM IDENTIFICATION OF NONLINEAR SYSTEMS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 32-43]
A., SAID S. EVALUATION OF CO-GENERATION AND TRI-GENERATION SYSTEMS EMPLOYING RECIPROCATING AND GAS TURBINE ENGINES FOR POWER GENERATION [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 176-198]
A., SEON J. DEVELOPMENT OF INDOOR NAVIGATION SYSTEM FOR MOBILE ROBOT BY USING RFID [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 25-32]
A., SEOUDY SIMULATION OF A REVERSE OSMOSIS SEAWATER DESALINATION PLANT, PART 1: THEORETICAL MODELING OF A REAL PLANT AND ITS VALIDATION [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 464-482]
A., SEOUDY SIMULATION OF A REVERSE OSMOSIS SEAWATER DESALINATION PLANT, PART 2: EXPERIMENTAL MEASUREMENTS AND PREDICTION STUDY ON THE VALIDATED SIMULATION MODEL [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 483-505]
A., SHIRAZI FINITE ELEMENT ANALYSIS OF A STEEL POST INSERTED IN POLYMER CYLINDER UNDER PULL-OUT AND TORQUE LOADINGS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 96-107]
A., SULAIMAN S. THE EFFECT OF DROPLETS ON BUOYANCY IN VERY RICH ISO-OCTANE-AIR FLAMES [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 199-209]
A., TAHAKOURT A POSTERIORI ERROR INDICATOR FOR COULOMB’S FRICTIONAL CONTACT [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 74-86]
A., TSOLAKIS IMPACT OF VARIABLE INTAKE-VALVE-TIMING ON HOMOGENEOUS CHARGE COMPRESSION IGNITION (HCCI) ENGINE PARAMETERS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 246-256]
A., WAGIH DYNAMICS AND STABILITY OF GUN-BARRELS WITH MOVING BULLETS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 33-46]
A., YAPICI EFFECT OF LOW VELOCITY IMPACT DAMAGE ON COMPOSITE PLATES [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 1-8]
A., YAPICI FATIGUE CRACK GROWTH OF STAINLESS STEEL FIBER REINFORCED ALUMINUM COMPOSITES [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 34-46]
A., YILMAZ A FRACTOGRAPHICAL STUDY ON BORON ADDED ARMOR STEEL DEVELOPED BY ALLOYING AND HEAT TREATMENT TO UNDERSTAND ITS BALLISTIC PERFORMANCE [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 63-76]
A., YILMAZ MICROSTRUCTURAL CHARACTERIZATON AND EFFECTS ON MECHANICAL PROPERTIES OF BORON ADDED ARMOR STEELS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 50-62]
A., YOUNES M.M. DAMAGE PREDICTION OF AXIALLY CRUSHED CORRUGATED FRUSTA [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 103-116]

B

B., DAACHI NONLINEAR ∞ H CONTROL OF A QUADROTOR UNMANNED AERIAL VEHICLE [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 48-57]
B., Derby THE TRANSITION FROM SINGLE TO MULTIPLE CRACKING IN CERAMIC/METAL LAMINATES [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 47-63]
B., GUNEY MODELLING OF LIGHT RANGE COMMERCIAL VEHICLE PROPELLER SHAFTS UNDER DYNAMİC EFFECTS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 1-11]
B., HOO C. HIGH TEMPERATURE FATIGUE BENDING PROPERTIES OF LOW CARBON STEEL [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 84-95]
B., IMINE EFFECTS OF A DIRECTED CO-FLOW ON A TURBULENT METHANE JET [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 382-391]
B., SAHARI B. THE EFFECT OF RIBS ON BEHAVIOR OF NATURAL GAS VEHICLE PLATFORM BACKBONE WITH STAMPING CONSIDERATION [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 67-78]
B., TARABA COMPUTER MODELLING OF INDUCTION HEATING FOR THE PROCESSES OF SURFACE HARDENING [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 77-88]
B., TARABA PREDICTION OF ENERGY STATES OF THE PROBE DURING QUENCHING IN ISOMAX 166 OIL APPLYING BY EXPERIMENT AND NUMERICAL SIMULATION [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 89-99]
B., TRAYKOV ANAYSIS AND CONTROL LAWS OF SEMI-ACTIVE VEHICLE SUSPENSION SYSTEMS WITH RENDING AN ACCOUNT OF THE PHYSICAL CHARACTERISTICS OF MAGNETO-RHEOLOGICAL DAMPERS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 15-31]

C

C, GUARNACCIA MEASUREMENTS OF HIGH SPEED TRAIN NOISE DETECTED AT A RELEVANT DISTANCE AND A SIMPLE NUMERICAL MODEL. [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 81-91]
C., AKCAN OPTIMIZATION SCHEME for a SMALL CROSS-FLOW HYDRO TURBINE RUNNER [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 22-38]
C., GUARNACCIA MEASUREMENT AND ANALYSIS OF TRAIN NOISE DETECTED ON A BUILDING FAÇADE. [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 58-67]
C., KARRA INFLUENCE OF THE VISCOTHERMAL EFFECTS ON THE VIBROACOUSTIC BEHAVIOR OF A DOUBLE PLATES SYSTEM [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 68-80]
C., KOO V. THE MECHANICAL DESIGN AND CONSTRUCTION OF A TRUCK-MOUNTED SCATTEROMETER PLATFORM [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 23-28]
Ch., BOURAOUI COMPARATIVE STUDY OF INITIATION FATIGUE LIFE OF FREE DEFECT AND DEFECTIVE MATERIALS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 39-46]
C-J, CHOU MORPHOLOGICAL CONTROL OF SINGLE CRYSTALLINE SILICON NANOWIRES AT NEAR-ROOM TEMERATURES [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 26-36]
C-S, WU MORPHOLOGICAL CONTROL OF SINGLE CRYSTALLINE SILICON NANOWIRES AT NEAR-ROOM TEMERATURES [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 26-36]
C-Y, CHEN MORPHOLOGICAL CONTROL OF SINGLE CRYSTALLINE SILICON NANOWIRES AT NEAR-ROOM TEMERATURES [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 26-36]

D

D., AMMOUR NUMERICAL SIMULATION OF AN IN-LINE TUBE BUNDLE USING THE URANS APPROACH [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 416-430]
D., BATORY THICK AND WELL ADHERENT CARBON LAYERS FOR AUTOMOTIVE INDUSTRY [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 82-88]
D., DAS ENHANCEMENT OF WEAR RESISTANCE OF DIE STEEL BY DEEP CRYOGENIC TREATMENT [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 146-158]
D., FOJTU ACOUSTIC AND THERMAL PROPERTIES OF POLYMERIC AND BUILDING MATERIALS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 50-57]
D., FRANCIA AN INNOVATIVE METHOD FOR DETERMINING MAXIMUM POWER OBTAINABLE FROM A COMMON RAIL TURBOCHARGED DIESEL ENGINE STARTING FROM EXPERIMENTAL DATA [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 224-234]
D., FRANCIA AIRCRAFT PROPULSION SYSTEMS : A DIESEL HYBRID ENGINE [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 235-245]
D., HORMDEE THE HEAT DEFORMATION ANALYSIS IN BRIDGE CARRIER [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 144-153]
D., HORMDEE THE EFFECT OF AIR LATCH ON THE AIRFLOW IN 3.5-INCH HARD DISK DRIVE [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 369-381]
D., KEE C. DEVELOPMENT OF INDOOR NAVIGATION SYSTEM FOR MOBILE ROBOT BY USING RFID [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 25-32]
D., LUKÁŠ CARBON-POLYMER NANOCOMPOSITE ON BASE OF NANOFIBER TEXTILE PRODUCED BY NANOSPIDER METHOD [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 18-25]
D., MAINO MEASUREMENT AND ANALYSIS OF TRAIN NOISE DETECTED ON A BUILDING FAÇADE. [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 58-67]
D., MAINO MEASUREMENTS OF HIGH SPEED TRAIN NOISE DETECTED AT A RELEVANT DISTANCE AND A SIMPLE NUMERICAL MODEL. [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 81-91]

E

E., ELSHAMARKA S. APPLICATION OF CFD TECHNIQUE FOR ASSESEMENT OF ROAD TUNNEL VENTILAION [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 48-66]
E., GHEDINI MODELLING AND COMPARISON OF DIFFERENT DESIGN SOLUTIONS AND EXPERIMENTAL RESULTS FOR DC TRANSFERRED ARC PLASMA CUTTING TORCHES [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 73-83]
E., GUNDOGAR MODELLING OF LIGHT RANGE COMMERCIAL VEHICLE PROPELLER SHAFTS UNDER DYNAMİC EFFECTS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 1-11]
E., HRUŠKOVÁ BASE CONDITIONS OF MULTISPINDLE HEAD DESIGN [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 61-67]
E., KHALIL E. AIR FLOW PATTERNS IN AN AIR CONDITIONED MEASURING EQUIPMENT LABORATORY [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 31-47]
E., MORSI VIBRATION BEHAVIOR OF THE ROTOR WITH TRANSVERE CRACK WITH SOME COMMENTS ON CRACK DETECTION [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 12-22]
E., TURKES THEORETICAL AND EXPERIMENTAL INVESTIGATION OF THE ANALYSIS OF CHATTER VIBRATION AND STABLITY FOR ORTHOGONAL CUTTING IN TURNING [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 1-16]
EL-SHAER, Y. I. A SURVEY ON THE STRUCTURAL FAILURE ANALYSIS DUE TO IMPACT [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 47-73]

F

F, AHMAD ASSESSING THERMAL VARIATION IN BENCH AND CAROUSELTYPE PRODUCTION TOOLS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 89-96]
F, BOUROUIS Optimization to the failure of laminated composites with different provisions of reinforcement [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 47-53]
F, MILI Optimization to the failure of laminated composites with different provisions of reinforcement [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 47-53]
F, RAVI N.M. EXPERIMENTAL AND NUMERICAL STUDY OF POWDER METALLURGY PERFORMANCE FOR AUTOMOTIVE APPLICATIONS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 200-208]
F., AHMAD M. THE EFFECT OF RIBS ON BEHAVIOR OF NATURAL GAS VEHICLE PLATFORM BACKBONE WITH STAMPING CONSIDERATION [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 67-78]
F., AKSIT M. OPTIMIZATION SCHEME for a SMALL CROSS-FLOW HYDRO TURBINE RUNNER [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 22-38]
F., CHENG C. A MALAYSIAN PORTABLE THERMOACOUSTIC REFRIGERATOR SYSTEM [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 10-17]
F., FARIS W. AN ASSESSMENT OF SEMI-ACTIVE SUSPENSION FOR PASSENGER CARS USING FULL CAR MODEL [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 1-14]
F., LAAOUAD A NEW ENGINEERING METHOD FOR FUZZY RELIABILITY ANALYSIS OF SURGE CONTROL IN CENTRIFUGAL COMPRESSOR [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 106-116]
F., MAC-GREGOR J. MACHINING PROCESS PLANNING THROUGH LATENT VARIABLE MODEL INVERSION [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 135-155]
F., MAT TAHIR ACOUSTIC PROPERTIES OF SOUND ABSORPTION PANELS USING MULTI-LAYER COIR FIBERS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 92-98]
F., MOSTAFA K. THE USE OF BASELINE MEASUREMENTS FOR IMPROVED DAMAGE DETECTION USING DAMAGE LOCATION VECTORS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 95-104]
F., MOUSTAFA K.A. LEAK DETECTION AND LOCALIZATION OF THE PIPELINE SYSTEMS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 431-448]
F., SHEHADEH M. MODELING CRYSTALLINE STRUCTURE FOR METALS USING A THREE DIMENSIONAL SIMULATION CODE: PART I [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 209-217]

G

G., ACHAR D.R. CURRENT ADVANCES IN WELDING TECHNOLOGY [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 60-72]
G., ELSHARKAWY S. MODELING CRYSTALLINE STRUCTURE FOR METALS USING A THREE DIMENSIONAL SIMULATION CODE: PART I [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 209-217]
G., GOMAA A. EXPERIMENTAL AND NUMERICAL INVESTIGATIONS OF FORCED CONVECTION OVER AN INCLINED HEATED FLAT PLATE [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 334-348]
G., IBRAHIM A. APPLICATION OF CFD TECHNIQUE FOR ASSESEMENT OF ROAD TUNNEL VENTILAION [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 48-66]
G., KIZILTAS OPTIMIZATION SCHEME for a SMALL CROSS-FLOW HYDRO TURBINE RUNNER [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 22-38]
G., RABIE M. IMPLEMENTATION OF ELECTRO-HYDRAULIC SERVO-VALVE FOR MODULATION OF THE ROCKET THRUST [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 117-132]
G., VENKOV ANAYSIS AND CONTROL LAWS OF SEMI-ACTIVE VEHICLE SUSPENSION SYSTEMS WITH RENDING AN ACCOUNT OF THE PHYSICAL CHARACTERISTICS OF MAGNETO-RHEOLOGICAL DAMPERS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 15-31]
GOMRI, Rabah INTERGRATION OF SEAWATER DESALINATION IN A SOLAR HEAT TRANSFORMER: ANALYSIS BY THE FIRST AND SECOND LAW OF THERMODYNAMICS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 133-147]

H

H, BADAWY M. VIBRATION BEHAVIOR OF THE ROTOR WITH TRANSVERE CRACK WITH SOME COMMENTS ON CRACK DETECTION [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 12-22]
H., Al-AWADI LEAK DETECTION AND LOCALIZATION OF THE PIPELINE SYSTEMS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 431-448]
H., Al-KAYIEM H. ON-LINE MEASUREMENTS AND ANALYSIS OF HIGH TURBULENT AND REVERSE FLOW FIELDS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 392-403]
H., AL-KAYIEM H. COMBINED EFFECT OF INCIDENCE - FOREBODY ANGLES ON THE FLOW STRUCTURE INSIDE SPIKED SUPERSONIC INTAKES [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 257-272]
H., ARAFA M. THE USE OF BASELINE MEASUREMENTS FOR IMPROVED DAMAGE DETECTION USING DAMAGE LOCATION VECTORS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 95-104]
H., ATAPEK A FRACTOGRAPHICAL STUDY ON BORON ADDED ARMOR STEEL DEVELOPED BY ALLOYING AND HEAT TREATMENT TO UNDERSTAND ITS BALLISTIC PERFORMANCE [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 63-76]
H., ATAPEK MICROSTRUCTURAL CHARACTERIZATON AND EFFECTS ON MECHANICAL PROPERTIES OF BORON ADDED ARMOR STEELS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 50-62]
H., AZHARI C. INTERLAMINAR FRACTURE TOUGHNESS OF MULTI-LAYER WOVEN SILK FIBRE/POLYESTER COMPOSITES [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 154-162]
H., BADRAN VIBRATION CHARACTERISTICS OF PERIODIC SANDWICH BEAMS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 34-48]
H., FOULADI M. VIBRATION SOURCE ESTIMATION INSIDE OF MACHINERY [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 23-33]
H., FUKUNAGA BUCKLING ANALYSIS OF CARBON NANOTUBES USING A BEAM ELEMENT BASED ON MOLECULAR MECHANICS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 196-202]
H., IBRAHIM H. AERO-THERMO-MECHANICAL CHARACTERISTICS OF SHAPE MEMORY ALLOY HYBRID COMPOSITE PANELS WITH GEOMETRIC IMPERFECTION [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 163-176]
H., JAMIL THE MECHANICAL DESIGN AND CONSTRUCTION OF A TRUCK-MOUNTED SCATTEROMETER PLATFORM [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 23-28]
H., KENAWY S. EFFECT OF HIGH TEMERATURE TREATMENT ON THE PROPERTIES OF CORDIERITE- ZIRCONIA NANOCOMPOSITES [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 37-49]
H., KHAMIS DETECTION OF HIDDEN CORROSION USING ULTRASONIC NONDESTRUCTIVE EVALUATION [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 192-199]
H., LOTFY A. SIMULATION OF A REVERSE OSMOSIS SEAWATER DESALINATION PLANT, PART 1: THEORETICAL MODELING OF A REAL PLANT AND ITS VALIDATION [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 464-482]
H., LOTFY A. SIMULATION OF A REVERSE OSMOSIS SEAWATER DESALINATION PLANT, PART 2: EXPERIMENTAL MEASUREMENTS AND PREDICTION STUDY ON THE VALIDATED SIMULATION MODEL [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 483-505]
H., MABROUK M. SOCIAL POTENTIAL MODEL TO SIMULATE EMERGENT BEHAVIOUR FOR SWARM ROBOTS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 33-47]
H., MAOUCH EFFECT OF TITANIUM, MOLYBDENUM AND MANGANESE ON WEAR BEHAVIOUR OF HIGH CHROMIUM CAST IRON [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 138-145]
H., NEGM VIBRATION CHARACTERISTICS OF PERIODIC SANDWICH BEAMS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 34-48]
H., RAGHEB EVALUATION OF WHEELED VEHICLE MOBILITY AND PERFORMANCE PREDICTION ON DEFORMABLE SOIL [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 54-66]
HASMIRA, HASMIRA COMPUTER SIMULATION OF BLANKING PROCESS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 68-80]

I

I., AHMED M. THERMAL ANALYSIS OF A MICRO DEVICE USED FOR DETECTION OF COLORECTAL CANCER [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 148-157]
I., CETINER MODELLING OF LIGHT RANGE COMMERCIAL VEHICLE PROPELLER SHAFTS UNDER DYNAMİC EFFECTS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 1-11]
I., EL-ELAMY M. DYNAMIC RESPONSE OF AN ADHASIVE BONDED JOINT FOR COMPOSITE STRUCTURE [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 83-94]
I., IHSAN S. AN ASSESSMENT OF SEMI-ACTIVE SUSPENSION FOR PASSENGER CARS USING FULL CAR MODEL [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 1-14]
I., KANDEMIR OPTIMIZATION SCHEME for a SMALL CROSS-FLOW HYDRO TURBINE RUNNER [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 22-38]
I., MOHAMED K. USING MULTIVARIATE LATENT MODELS TO MONITOR A PRINTING MACHINE AND PREDICT MACHINE FAILURE [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 49-62]
I., SALEH SIMULATION OF A REVERSE OSMOSIS SEAWATER DESALINATION PLANT, PART 1: THEORETICAL MODELING OF A REAL PLANT AND ITS VALIDATION [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 464-482]
I., SALEH SIMULATION OF A REVERSE OSMOSIS SEAWATER DESALINATION PLANT, PART 2: EXPERIMENTAL MEASUREMENTS AND PREDICTION STUDY ON THE VALIDATED SIMULATION MODEL [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 483-505]
I., TAYMAZ MODELLING OF LIGHT RANGE COMMERCIAL VEHICLE PROPELLER SHAFTS UNDER DYNAMİC EFFECTS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 1-11]

J

J., GENOVE ANAYSIS AND CONTROL LAWS OF SEMI-ACTIVE VEHICLE SUSPENSION SYSTEMS WITH RENDING AN ACCOUNT OF THE PHYSICAL CHARACTERISTICS OF MAGNETO-RHEOLOGICAL DAMPERS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 15-31]
J., GONSALVIS INFLUENCE OF HIGH PROFILE SHIFT IN IMPROVING SURFACE DURABILITY [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 1-14]
J., GONSALVIS DESIGN AND DEVELOPMENT OF POWER RECIRCULATING GEAR TEST RIG [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 64-73]
J., QUARTIERI MEASUREMENT AND ANALYSIS OF TRAIN NOISE DETECTED ON A BUILDING FAÇADE. [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 58-67]
J., QUARTIERI MEASUREMENTS OF HIGH SPEED TRAIN NOISE DETECTED AT A RELEVANT DISTANCE AND A SIMPLE NUMERICAL MODEL. [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 81-91]
J., SYARIF FABRICATION OF MAGNESIUM ALLOY FROM A PRE-ALLOYED POWDER USING HOT DIE COMPACTION PROCESS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 8-17]
J., SYARIF CHANGE IN MICROSTRUCTURE AND HARDNESS OF TI-6%AL-4%V ELI ALLOY ON TEMPERING PROCESS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 159-165]
Jr., LAPCIK L. THE USING OF POLYURETHANE FOAMS INSIDE AIRCRAFT FUSELAGE AS ACOUSTIC INSULATION [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 32-38]
Jr., LAPCIK L. ACOUSTIC AND THERMAL PROPERTIES OF POLYMERIC AND BUILDING MATERIALS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 50-57]

K

K., ARIFFIN A. VIBRATION SOURCE ESTIMATION INSIDE OF MACHINERY [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 23-33]
K., ARNAUDOV ANAYSIS AND CONTROL LAWS OF SEMI-ACTIVE VEHICLE SUSPENSION SYSTEMS WITH RENDING AN ACCOUNT OF THE PHYSICAL CHARACTERISTICS OF MAGNETO-RHEOLOGICAL DAMPERS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 15-31]
K., BALASUBRAMANIAM MATERIAL PROPERTY MEASUREMENTS USING NDT METHODS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 166-177]
K., BOUHAMLA EFFECT OF TITANIUM, MOLYBDENUM AND MANGANESE ON WEAR BEHAVIOUR OF HIGH CHROMIUM CAST IRON [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 138-145]
K., CAKIR MODELLING OF LIGHT RANGE COMMERCIAL VEHICLE PROPELLER SHAFTS UNDER DYNAMİC EFFECTS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 1-11]
K., DUTTA A. SILVER TOUGHENED ALUMINA CUTTING TOOL INSERTS: PERFORMANCE EVALUATION USING DYNAMIC COMPONENTS OF CUTTING FORCE SPECTRA [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 35-47]
K., DUTTA A. ENHANCEMENT OF WEAR RESISTANCE OF DIE STEEL BY DEEP CRYOGENIC TREATMENT [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 146-158]
K., ELBASHEER M. NUMERICAL INVESTIGATION OF FATIGUE LIFE ON OPTIMUM AUTOFRETTAGED PRESSURIZED THICK-WALLED CYLINDERS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 1-17]
K., ELBASHEER M. NUMERICAL INVESTIGATION OF FATIGUE LIFE ON OPTIMUM AUTOFRETTAGED PRESSURIZED THICK-WALLED CYLINDERS. [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 1-17]
K., IBRAHIM M. APPLICATION OF PRESSURE SENSTIVE FOIL TECHNIQUE TO VISULAIZE SUBSONIC JET FLOW OVER A PLATE [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 404-415]
K., MORI APPLICATION OF PRESSURE SENSTIVE FOIL TECHNIQUE TO VISULAIZE SUBSONIC JET FLOW OVER A PLATE [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 404-415]
K., NONUYA BUCKLING ANALYSIS OF CARBON NANOTUBES USING A BEAM ELEMENT BASED ON MOLECULAR MECHANICS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 196-202]
K., PINNOJI P. DYNAMIC STUDIES ON MOTORCYCLE HELMETS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 66-73]
K., PRASAD RAO DRY SLIDING WEAR BEHAVIOR OF NANO and MICRON PARTICLES REINFORCED P/M BASED METAL MATRIX COMPOSITES [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 89-101]
K., RAY K. SILVER TOUGHENED ALUMINA CUTTING TOOL INSERTS: PERFORMANCE EVALUATION USING DYNAMIC COMPONENTS OF CUTTING FORCE SPECTRA [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 35-47]
K., RAY K. ENHANCEMENT OF WEAR RESISTANCE OF DIE STEEL BY DEEP CRYOGENIC TREATMENT [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 146-158]
K., RAY K. THE VISION OF FRACTURE TOUGHNESS ASSESSMENT OF STRUCTURAL MATERIALS FOR QUALITY CONTROL AT THE MANUFACTURING STAGE [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 1-13]
K., SACHIDANANDA H. INFLUENCE OF HIGH PROFILE SHIFT IN IMPROVING SURFACE DURABILITY [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 1-14]
K., SACHIDANANDA H. DESIGN AND DEVELOPMENT OF POWER RECIRCULATING GEAR TEST RIG [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 64-73]
K., SAENSUMRONG THE HEAT DEFORMATION ANALYSIS IN BRIDGE CARRIER [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 144-153]
K., SING L. THE MECHANICAL DESIGN AND CONSTRUCTION OF A TRUCK-MOUNTED SCATTEROMETER PLATFORM [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 23-28]
K., VELÍŠEK BASE CONDITIONS OF MULTISPINDLE HEAD DESIGN [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 61-67]
K., VELÍŠEK MATERIAL FLOW IN FLEXIBLE MANUFACTURING [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 111-120]
K., VENKATESWARAN DRY SLIDING WEAR BEHAVIOR OF NANO and MICRON PARTICLES REINFORCED P/M BASED METAL MATRIX COMPOSITES [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 89-101]
K., WIRATKASEM WRINKLING PREDICTION FOR MIXED-HARDENING METALS IN DEEP-DRAWING PROCESS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 203-214]
KHAN, WAQAR A. EFFECT OF VARIABLE THERMAL CONDUCTIVITY ON HEAT TRANSFER FROM SPINES OF UNIFORM CROSS SECTIONS USING HPM [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 324-333]

L

L, LENZA T.L. MEASUREMENTS OF HIGH SPEED TRAIN NOISE DETECTED AT A RELEVANT DISTANCE AND A SIMPLE NUMERICAL MODEL. [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 81-91]
L., ADJLOUT NUMERICAL SIMULATION OF AN IN-LINE TUBE BUNDLE USING THE URANS APPROACH [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 416-430]
L., HAMMAMI INFLUENCE OF THE VISCOTHERMAL EFFECTS ON THE VIBROACOUSTIC BEHAVIOR OF A DOUBLE PLATES SYSTEM [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 68-80]
L., LAKSHMAN N. INFLUENCE OF HIGH PROFILE SHIFT IN IMPROVING SURFACE DURABILITY [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 1-14]
L., LENZA T.L. MEASUREMENT AND ANALYSIS OF TRAIN NOISE DETECTED ON A BUILDING FAÇADE. [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 58-67]
L., PIANCASTELLI AN INNOVATIVE METHOD FOR DETERMINING MAXIMUM POWER OBTAINABLE FROM A COMMON RAIL TURBOCHARGED DIESEL ENGINE STARTING FROM EXPERIMENTAL DATA [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 224-234]
L., PIANCASTELLI AIRCRAFT PROPULSION SYSTEMS : A DIESEL HYBRID ENGINE [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 235-245]
L., WYSZYNSKI M. IMPACT OF VARIABLE INTAKE-VALVE-TIMING ON HOMOGENEOUS CHARGE COMPRESSION IGNITION (HCCI) ENGINE PARAMETERS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 246-256]

M

M, ABID EFFECT OF BOLT SCATTER ON DIFFERENT SIZES OF GASKETED BOLTED FLANGE JOINTS: A COMPARATIVE F.E. STUDY [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 74-83]
M, BACCAR NUMERICAL HYDRODYNAMIC AND THERMAL BEHAVIORS IN A CHANNEL WITH ATTACHED AND DETACHED RIBS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 22-30]
M, MSEDDI NUMERICAL HYDRODYNAMIC AND THERMAL BEHAVIORS IN A CHANNEL WITH ATTACHED AND DETACHED RIBS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 22-30]
M., Abdel Dayem A. SIMULATION AND OPTIMIZATION OF H2O-LIBR ABSORPTION REFRIGERATION SYSTEM OPERATED BY SOLAR ENERGY UNDER EGYPTIAN CLIMATIC CONDITIONS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 349-368]
M., ABDUL-RANI A. ASSESSING THERMAL VARIATION IN BENCH AND CAROUSELTYPE PRODUCTION TOOLS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 89-96]
M., ABUELFOUTOUH N. IMPACT DAMAGE PREDICTION IN SHELL STRUCTURES [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 21-32]
M., AHMADIAN AN ASSESSMENT OF SEMI-ACTIVE SUSPENSION FOR PASSENGER CARS USING FULL CAR MODEL [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 1-14]
M., ALADIN DYNAMICS AND STABILITY OF GUN-BARRELS WITH MOVING BULLETS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 33-46]
M., ARAFA INPUT SHAPING TECHNIQUES FOR LIQUID SLOSH SUPPRESSION [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 105-117]
M., ARSAD N. THE EFFECT OF RIBS ON BEHAVIOR OF NATURAL GAS VEHICLE PLATFORM BACKBONE WITH STAMPING CONSIDERATION [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 67-78]
M., AWAAD EFFECT OF HIGH TEMERATURE TREATMENT ON THE PROPERTIES OF CORDIERITE- ZIRCONIA NANOCOMPOSITES [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 37-49]
M., AZZAZ MODELISATION OF THERMOELASTIC LINEAR BEHAVIOUR OF TUNGSTEN FILAMENTS IN TWIN HELICAL SPRING CONFIGURATION [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 128-143]
M., BEHULOVA COMPUTER MODELLING OF INDUCTION HEATING FOR THE PROCESSES OF SURFACE HARDENING [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 77-88]
M., BENDARY I. FINITE ELEMENT MODEL OF A SMART ISOTROPIC BEAM WITH DISTRIBUTED PIZOELECETRIC ACTUATORS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 242-258]
M., BOULENOUAR EFFECTS OF A DIRECTED CO-FLOW ON A TURBULENT METHANE JET [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 382-391]
M., CLAPA THICK AND WELL ADHERENT CARBON LAYERS FOR AUTOMOTIVE INDUSTRY [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 82-88]
M., DAMMAK FINITE ELEMENT ANALYSIS OF A STEEL POST INSERTED IN POLYMER CYLINDER UNDER PULL-OUT AND TORQUE LOADINGS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 96-107]
M., DAUD M.A. FABRICATION OF MAGNESIUM ALLOY FROM A PRE-ALLOYED POWDER USING HOT DIE COMPACTION PROCESS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 8-17]
M., DUWAIRI H. ON THE NON-ISENTROPIC SOUND WAVES PROPAGATION OF A STATIONAY OR FLOWING FLUID IN A CYLINDERICAL TUBE FILLED WITH POROUS MEDIA [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 273-284]
M., EL-AFANDY M. COMPUTER SIMULATION TECHNIQUE TO REDUCE RESULTED RESIDUAL STRESSES AND DISTORTION IN HIGH STRENGTH THIN BUTT WELDED SHIP PANELS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 97-110]
M., EL-ASSAL A. FRACTURE BEHAVIOR OF THE POLYMETHYL METHACRYLATE WITH TWO DIFFERENT CURING PROCESSES [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 117-127]
M., El-FARRAN M. IMPACT DAMAGE PREDICTION IN SHELL STRUCTURES [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 21-32]
M., EL-GAMMAL M. COMPUTER SIMULATION TECHNIQUE TO REDUCE RESULTED RESIDUAL STRESSES AND DISTORTION IN HIGH STRENGTH THIN BUTT WELDED SHIP PANELS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 97-110]
M., EL-HADY A. DETECTING STICK-SLIP OCCURRENCE BY NEAR FIELD NOISE MEASUREMENTS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 39-49]
M., FARAG A. AIR FLOW PATTERNS IN AN AIR CONDITIONED MEASURING EQUIPMENT LABORATORY [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 31-47]
M., FARID A. FINITE ELEMENT ANALYSIS OF COMPRESSOR BLADES UNDER EXTENSION, BENDING, AND TORSION LOADS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 177-195]
M., FATOUH SIMULATION AND OPTIMIZATION OF H2O-LIBR ABSORPTION REFRIGERATION SYSTEM OPERATED BY SOLAR ENERGY UNDER EGYPTIAN CLIMATIC CONDITIONS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 349-368]
M., FAYYAD S. SIX-PORT MODEL FOR SOUND PROPAGATION IN A POROUS MEDIA WITH APPLICATION TO DIESEL PARTICULATE FILTERS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 18-31]
M., FOUAD M. LEAK DETECTION AND LOCALIZATION OF THE PIPELINE SYSTEMS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 431-448]
M., GHONEAM S. DYNAMIC RESPONSE OF AN ADHASIVE BONDED JOINT FOR COMPOSITE STRUCTURE [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 83-94]
M., GUIDA MEASUREMENT AND ANALYSIS OF TRAIN NOISE DETECTED ON A BUILDING FAÇADE. [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 58-67]
M., HADDAR INFLUENCE OF THE VISCOTHERMAL EFFECTS ON THE VIBROACOUSTIC BEHAVIOR OF A DOUBLE PLATES SYSTEM [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 68-80]
M., HAQUE M. EFFECT OF SIZE AND SHAPE OF ELECTRODES ON THE PERFORMANCE OF EDM [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 17-25]
M., HAQUE M. EFFECT OF STRONTIUM MODIFICATION ON MACHINABILITY OF ALUMINIUM-SILICON EUTECTIC ALLOY [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 130-137]
M., HASSAN SIMULATION AND OPTIMIZATION OF H2O-LIBR ABSORPTION REFRIGERATION SYSTEM OPERATED BY SOLAR ENERGY UNDER EGYPTIAN CLIMATIC CONDITIONS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 349-368]
M., HEGAB A. STUDY OF THERMOCAPILLARY EFFECTS IN TWO FLUID SYSTEMS USING A SINGLE PHASE MODEL [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 67-91]
M., HRAIRI THERMAL ANALYSIS OF A MICRO DEVICE USED FOR DETECTION OF COLORECTAL CANCER [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 148-157]
M., HRAIRI DETECTION OF HIDDEN CORROSION USING ULTRASONIC NONDESTRUCTIVE EVALUATION [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 192-199]
M., HRAIRI EXPERIMENTAL AND NUMERICAL STUDY OF POWDER METALLURGY PERFORMANCE FOR AUTOMOTIVE APPLICATIONS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 200-208]
M., HUSSEIN W. USING MULTIVARIATE LATENT MODELS TO MONITOR A PRINTING MACHINE AND PREDICT MACHINE FAILURE [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 49-62]
M., HUSSEIN W. MACHINING PROCESS PLANNING THROUGH LATENT VARIABLE MODEL INVERSION [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 135-155]
M., ISLAM M. PRE-MOULD PROCESSING FOR SYNTACTIC FOAMS: MODELLING, THEORY AND EXPERIMENT [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 178-191]
M., JURICKA THE USING OF POLYURETHANE FOAMS INSIDE AIRCRAFT FUSELAGE AS ACOUSTIC INSULATION [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 32-38]
M., KANOUN NUMERICAL HYDRODYNAMIC AND THERMAL BEHAVIORS IN A CHANNEL WITH ATTACHED AND DETACHED RIBS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 22-30]
M., KARA EFFECT OF LOW VELOCITY IMPACT DAMAGE ON COMPOSITE PLATES [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 1-8]
M., KEMRY M. A COMPARISON BETWEEN FLOWS OF THREE REACTION SYSTEMS THROUGH SUPERSONIC PROPULSIVE NOZZLES [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 158-175]
M., KHARRAT FINITE ELEMENT ANALYSIS OF A STEEL POST INSERTED IN POLYMER CYLINDER UNDER PULL-OUT AND TORQUE LOADINGS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 96-107]
M., LAŠČEK PREDICTION OF ENERGY STATES OF THE PROBE DURING QUENCHING IN ISOMAX 166 OIL APPLYING BY EXPERIMENT AND NUMERICAL SIMULATION [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 89-99]
M., LAWES THE EFFECT OF DROPLETS ON BUOYANCY IN VERY RICH ISO-OCTANE-AIR FLAMES [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 199-209]
M., M. KAMARAJ DRY SLIDING WEAR BEHAVIOR OF NANO and MICRON PARTICLES REINFORCED P/M BASED METAL MATRIX COMPOSITES [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 89-101]
M., MAHROUS A-F. IMPACT OF VARIABLE INTAKE-VALVE-TIMING ON HOMOGENEOUS CHARGE COMPRESSION IGNITION (HCCI) ENGINE PARAMETERS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 246-256]
M., MANSOUR D.M. MACHINING PROCESS PLANNING THROUGH LATENT VARIABLE MODEL INVERSION [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 135-155]
M., METIN EFFECT OF LOW VELOCITY IMPACT DAMAGE ON COMPOSITE PLATES [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 1-8]
M., METWALLY H. VIBRATION BEHAVIOR OF THE ROTOR WITH TRANSVERE CRACK WITH SOME COMMENTS ON CRACK DETECTION [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 12-22]
M., MOHIUDDIN A.K. INVESTIGATION OF LOW END TORQUE DIP PROBLEM OF CAMPRO 1.6L ENGINE [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 39-53]
M., MORKOS S. AIR FLOW PATTERNS IN AN AIR CONDITIONED MEASURING EQUIPMENT LABORATORY [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 31-47]
M., MOUSA M. STUDY OF VEHICLE CRASHWORTHINESS APPLYING COMPOSITE MATERIALS (FRONTAL AND OFFSET IMPACT) [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 104-117]
M., MUSTAFA M. A NEW TECHNIQUE FOR ACTUATING PARALLEL MANIPULATORS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 13-24]
M., NAGA S. EFFECT OF HIGH TEMERATURE TREATMENT ON THE PROPERTIES OF CORDIERITE- ZIRCONIA NANOCOMPOSITES [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 37-49]
M., NAWARA G. LEAK DETECTION AND LOCALIZATION OF THE PIPELINE SYSTEMS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 431-448]
M., NEGM H. IMPACT DAMAGE PREDICTION IN SHELL STRUCTURES [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 21-32]
M., NEGM H. DYNAMICS AND STABILITY OF GUN-BARRELS WITH MOVING BULLETS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 33-46]
M., NOR M.J. VIBRATION SOURCE ESTIMATION INSIDE OF MACHINERY [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 23-33]
M., NOR M.J. A NEW TECHNIQUE FOR ACTUATING PARALLEL MANIPULATORS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 13-24]
M., NOR M.J. ACOUSTIC PROPERTIES OF SOUND ABSORPTION PANELS USING MULTI-LAYER COIR FIBERS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 92-98]
M., OSMAN M. AN INVESTIGATION OF THE EFFECT OF WORKING GAS TYPE ON MORPHOLOGICAL FEATURES OF THE DEPOSITED LAYERS ON A STEEL ALLOY PRODUCED BY IMPULSE PLASMA DEPOSITION TECHNIQUE [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 100-114]
M., RASHAD M. AN INVESTIGATION OF THE EFFECT OF WORKING GAS TYPE ON MORPHOLOGICAL FEATURES OF THE DEPOSITED LAYERS ON A STEEL ALLOY PRODUCED BY IMPULSE PLASMA DEPOSITION TECHNIQUE [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 100-114]
M., RASHWAN A. COMPUTER SIMULATION TECHNIQUE TO REDUCE RESULTED RESIDUAL STRESSES AND DISTORTION IN HIGH STRENGTH THIN BUTT WELDED SHIP PANELS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 97-110]
M., REİS THE EFFECTS OF CENTRIPETAL AND CORIOLIS FORCES ON THE DYNAMIC RESPONSE OF A CRACKED BEAM UNDER A MOVING MASS LOAD [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 63-82]
M., RIAD A. FINITE ELEMENT MODEL OF A SMART ISOTROPIC BEAM WITH DISTRIBUTED PIZOELECETRIC ACTUATORS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 242-258]
M., SAID E. USING MULTIVARIATE LATENT MODELS TO MONITOR A PRINTING MACHINE AND PREDICT MACHINE FAILURE [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 49-62]
M., SAKR I. STUDY OF THERMOCAPILLARY EFFECTS IN TWO FLUID SYSTEMS USING A SINGLE PHASE MODEL [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 67-91]
M., SALEM A. USING MULTIVARIATE LATENT MODELS TO MONITOR A PRINTING MACHINE AND PREDICT MACHINE FAILURE [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 49-62]
M., SALEM A. EVALUATION OF CHARACTERISTICS OF TRACKED VEHICLES TORSION BARS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 90-103]
M., SAPUAN S. HIGH TEMPERATURE FATIGUE BENDING PROPERTIES OF LOW CARBON STEEL [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 84-95]
M., SELIM S. STUDY OF THERMOCAPILLARY EFFECTS IN TWO FLUID SYSTEMS USING A SINGLE PHASE MODEL [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 67-91]
M., SENOUCI EFFECTS OF A DIRECTED CO-FLOW ON A TURBULENT METHANE JET [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 382-391]
M., SHEHATA M. FRACTURE BEHAVIOR OF THE POLYMETHYL METHACRYLATE WITH TWO DIFFERENT CURING PROCESSES [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 117-127]
M., TAWFIK DYNAMICS AND STABILITY OF GUN-BARRELS WITH MOVING BULLETS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 33-46]
M., TAWFIK VIBRATION CHARACTERISTICS OF PERIODIC SANDWICH BEAMS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 34-48]
M., TAWFIK AERO-THERMO-MECHANICAL CHARACTERISTICS OF SHAPE MEMORY ALLOY HYBRID COMPOSITE PANELS WITH GEOMETRIC IMPERFECTION [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 163-176]
M., TRABELSI FINITE ELEMENT ANALYSIS OF A STEEL POST INSERTED IN POLYMER CYLINDER UNDER PULL-OUT AND TORQUE LOADINGS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 96-107]
M., TURŇA PRODUCTION OF BIMETALLIC AND TRIMETALLIC MATERIALS BY EXPLOSION WELDING AND ALLIED PROCESSES [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 48-60]
M., UYANER EFFECT OF LOW VELOCITY IMPACT DAMAGE ON COMPOSITE PLATES [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 1-8]
M., VANCINI MODELLING AND COMPARISON OF DIFFERENT DESIGN SOLUTIONS AND EXPERIMENTAL RESULTS FOR DC TRANSFERRED ARC PLASMA CUTTING TORCHES [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 73-83]
M., XU H. IMPACT OF VARIABLE INTAKE-VALVE-TIMING ON HOMOGENEOUS CHARGE COMPRESSION IGNITION (HCCI) ENGINE PARAMETERS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 246-256]
M., YOUNES M. A SURVEY ON THE STRUCTURAL FAILURE ANALYSIS DUE TO IMPACT [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 47-73]
M., YOUNES M. EFFECT OF THE BARRIER GEOMETRY ON THE MITIGATION OF BLAST WAVES [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 54-65]
M., ZEITOUN O. FEASIBILITY OF USING HIGHLY COLD AIR IN AIR CONDITIONING IN RIYADH [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 1-21]
M.A., ELKADY EVALUATION OF CO-GENERATION AND TRI-GENERATION SYSTEMS EMPLOYING RECIPROCATING AND GAS TURBINE ENGINES FOR POWER GENERATION [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 176-198]
MARZANO, MARIO R. HISTORICAL REVIEW OF VARIABLE VALVE ACTUATION SYSTEMS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 12-38]

N

N., ATABERK FATIGUE CRACK GROWTH OF STAINLESS STEEL FIBER REINFORCED ALUMINUM COMPOSITES [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 34-46]
N., BAYOUMI H. ROLLING PROCESS SIMULATION USING A DEVELOPED EULERIAN FORMULATION [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 260-272]
N., BENGHANEM MODELISATION OF THERMOELASTIC LINEAR BEHAVIOUR OF TUNGSTEN FILAMENTS IN TWIN HELICAL SPRING CONFIGURATION [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 128-143]
N., GIRGIS EVALUATION OF WHEELED VEHICLE MOBILITY AND PERFORMANCE PREDICTION ON DEFORMABLE SOIL [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 54-66]
N., HAMDAN M. SIX-PORT MODEL FOR SOUND PROPAGATION IN A POROUS MEDIA WITH APPLICATION TO DIESEL PARTICULATE FILTERS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 18-31]
N., HU BUCKLING ANALYSIS OF CARBON NANOTUBES USING A BEAM ELEMENT BASED ON MOLECULAR MECHANICS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 196-202]
N., IBRAHIM THE MECHANICAL DESIGN AND CONSTRUCTION OF A TRUCK-MOUNTED SCATTEROMETER PLATFORM [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 23-28]
N., MAHMOOD N. THE MECHANICAL DESIGN AND CONSTRUCTION OF A TRUCK-MOUNTED SCATTEROMETER PLATFORM [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 23-28]
N., MOHAMED N.A. A NEW TECHNIQUE FOR ACTUATING PARALLEL MANIPULATORS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 13-24]
N., MOHD-GHAZALI SIMULATION OF ACOUSTIC GENERATION AND PROGRESSION IN A CLOSED CHAMBER [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 1-9]
N., MOHD-GHAZALI A MALAYSIAN PORTABLE THERMOACOUSTIC REFRIGERATOR SYSTEM [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 10-17]
N., MURAD M. ASSESSING THERMAL VARIATION IN BENCH AND CAROUSELTYPE PRODUCTION TOOLS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 89-96]
N., NIKABDULLAH COUPLED THERMO- MECHANICAL ANALYSIS OF SHEAR LOCALIZATION IN BULK METALLIC GLASSES [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 84-88]
NUCCIO, PATRIZIO HISTORICAL REVIEW OF VARIABLE VALVE ACTUATION SYSTEMS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 12-38]

P

P., BOONYARITCHAIKIT THE EFFECT OF AIR LATCH ON THE AIRFLOW IN 3.5-INCH HARD DISK DRIVE [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 369-381]
P., COOREVITS A POSTERIORI ERROR INDICATOR FOR COULOMB’S FRICTIONAL CONTACT [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 74-86]
P., D’AGOSTINO MEASUREMENT AND ANALYSIS OF TRAIN NOISE DETECTED ON A BUILDING FAÇADE. [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 58-67]
P., D’AGOSTINO MEASUREMENTS OF HIGH SPEED TRAIN NOISE DETECTED AT A RELEVANT DISTANCE AND A SIMPLE NUMERICAL MODEL. [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 81-91]
P., KOŠŤÁL BASE CONDITIONS OF MULTISPINDLE HEAD DESIGN [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 61-67]
P., KOŠŤÁL MATERIAL FLOW IN FLEXIBLE MANUFACTURING [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 111-120]
P., LOUDA CARBON-POLYMER NANOCOMPOSITE ON BASE OF NANOFIBER TEXTILE PRODUCED BY NANOSPIDER METHOD [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 18-25]
P., LUSZCZ IMPACT OF VARIABLE INTAKE-VALVE-TIMING ON HOMOGENEOUS CHARGE COMPRESSION IGNITION (HCCI) ENGINE PARAMETERS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 246-256]
P., McHUGH J. SIMULATION OF ACOUSTIC GENERATION AND PROGRESSION IN A CLOSED CHAMBER [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 1-9]
P., MIALHE RELIABILITY OF MICROELECTRONIC DEVICES FROM EMITTERBASE JUNCTION CHARACTERIZATION [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 29-37]
P., NESVADBA PRODUCTION OF BIMETALLIC AND TRIMETALLIC MATERIALS BY EXPLOSION WELDING AND ALLIED PROCESSES [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 48-60]
P., P. MAHAJAN DYNAMIC STUDIES ON MOTORCYCLE HELMETS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 66-73]
P., THAMBURAJA COUPLED THERMO- MECHANICAL ANALYSIS OF SHEAR LOCALIZATION IN BULK METALLIC GLASSES [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 84-88]

R

R, MCINNES C. SOCIAL POTENTIAL MODEL TO SIMULATE EMERGENT BEHAVIOUR FOR SWARM ROBOTS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 33-47]
R., EKAMBARAM COUPLED THERMO- MECHANICAL ANALYSIS OF SHEAR LOCALIZATION IN BULK METALLIC GLASSES [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 84-88]
R., FATHALLAH COMPARATIVE STUDY OF INITIATION FATIGUE LIFE OF FREE DEFECT AND DEFECTIVE MATERIALS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 39-46]
R., GNANAMOORTHY TRIBO BEHAVIOUR OF POLYMER NANOCOMPOSITES (MODELLING AND EXPERIMENTS) [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 49-59]
R., ISMAIL A. ACOUSTIC PROPERTIES OF SOUND ABSORPTION PANELS USING MULTI-LAYER COIR FIBERS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 92-98]
R., PRAKASH H. INFLUENCE OF HIGH PROFILE SHIFT IN IMPROVING SURFACE DURABILITY [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 1-14]
R., PRAKASH H. DESIGN AND DEVELOPMENT OF POWER RECIRCULATING GEAR TEST RIG [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 64-73]
R., RAJESH A. DESIGN AND DEVELOPMENT OF POWER RECIRCULATING GEAR TEST RIG [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 64-73]
R., SALAMAT COMPRESSOR PERFORMANCE ADAPTATION FOR GAS PATH ANALYSIS AND DIAGNOSTICS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 449-463]
R., ZULKIFLI INTERLAMINAR FRACTURE TOUGHNESS OF MULTI-LAYER WOVEN SILK FIBRE/POLYESTER COMPOSITES [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 154-162]
R., ZULKIFLI ACOUSTIC PROPERTIES OF SOUND ABSORPTION PANELS USING MULTI-LAYER COIR FIBERS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 92-98]

S

S, HAJJAJ S. EFFECT OF STRONTIUM MODIFICATION ON MACHINABILITY OF ALUMINIUM-SILICON EUTECTIC ALLOY [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 130-137]
S., ABDEL-JABER M. NON-LINEAR FORCED VIBRATION OF A TAPERED CANTILEVER BEAM [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 1-11]
S., ABDULLAD VIBRATION SOURCE ESTIMATION INSIDE OF MACHINERY [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 23-33]
S., AL-DOSARY FRACTURE BEHAVIOR OF THE POLYMETHYL METHACRYLATE WITH TWO DIFFERENT CURING PROCESSES [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 117-127]
S., ALJIBORI H.S. STUDY ON OPTIMIZATION OF COMPOSITE CONICAL STRUCTURES FOR CRASHWORTHINESS APPLICATIONS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 79-89]
S., ASHRAF I. MIXED-REALITY ENVIRONMENT FOR ONLINE SYSTEM IDENTIFICATION OF NONLINEAR SYSTEMS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 32-43]
S., DALLAVALLE MODELLING AND COMPARISON OF DIFFERENT DESIGN SOLUTIONS AND EXPERIMENTAL RESULTS FOR DC TRANSFERRED ARC PLASMA CUTTING TORCHES [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 73-83]
S., EL-BEBLAWY M. EFFECT OF THE BARRIER GEOMETRY ON THE MITIGATION OF BLAST WAVES [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 54-65]
S., EL-MESALLAMY A. FEATURE RECOGNITION TECHNIQUE FOR TURNING OPERATION [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 121-134]
S., EL-SAYED M. EFFECT OF THE BARRIER GEOMETRY ON THE MITIGATION OF BLAST WAVES [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 54-65]
S., HAMOUDA A.M. THE EFFECT OF RIBS ON BEHAVIOR OF NATURAL GAS VEHICLE PLATFORM BACKBONE WITH STAMPING CONSIDERATION [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 67-78]
S., HARNCHOOWONG WRINKLING PREDICTION FOR MIXED-HARDENING METALS IN DEEP-DRAWING PROCESS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 203-214]
S., HEGAZY EVALUATION OF WHEELED VEHICLE MOBILITY AND PERFORMANCE PREDICTION ON DEFORMABLE SOIL [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 54-66]
S., KAOUA MODELISATION OF THERMOELASTIC LINEAR BEHAVIOUR OF TUNGSTEN FILAMENTS IN TWIN HELICAL SPRING CONFIGURATION [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 128-143]
S., KARAGOEZ UTILIZATION OF NANOCRYSTALLINE DIAMOND POWDER IN RUBBER COMPOUNDS AS A NOVEL REINFORCING MATERIAL [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 1-7]
S., KARAGOEZ A FRACTOGRAPHICAL STUDY ON BORON ADDED ARMOR STEEL DEVELOPED BY ALLOYING AND HEAT TREATMENT TO UNDERSTAND ITS BALLISTIC PERFORMANCE [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 63-76]
S., KARAGOEZ MICROSTRUCTURAL CHARACTERIZATON AND EFFECTS ON MECHANICAL PROPERTIES OF BORON ADDED ARMOR STEELS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 50-62]
S., KIM S. DEVELOPMENT OF INDOOR NAVIGATION SYSTEM FOR MOBILE ROBOT BY USING RFID [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 25-32]
S., KIM H. PRE-MOULD PROCESSING FOR SYNTACTIC FOAMS: MODELLING, THEORY AND EXPERIMENT [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 178-191]
S., KOUSA FINITE ELEMENT ANALYSIS OF COMPRESSOR BLADES UNDER EXTENSION, BENDING, AND TORSION LOADS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 177-195]
S., MITURA CARBON-POLYMER NANOCOMPOSITE ON BASE OF NANOFIBER TEXTILE PRODUCED BY NANOSPIDER METHOD [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 18-25]
S., MITURA THICK AND WELL ADHERENT CARBON LAYERS FOR AUTOMOTIVE INDUSTRY [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 82-88]
S., MRIDHA PROCESSING CONDITIONS AND HARDNESS DEVELOPMENT IN NITRIDED COMMERCIAL STEELS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 115-129]
S., NURUDIN A MALAYSIAN PORTABLE THERMOACOUSTIC REFRIGERATOR SYSTEM [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 10-17]
S., ORAK THEORETICAL AND EXPERIMENTAL INVESTIGATION OF THE ANALYSIS OF CHATTER VIBRATION AND STABLITY FOR ORTHOGONAL CUTTING IN TURNING [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 1-16]
S., PEI K. INTERLAMINAR FRACTURE TOUGHNESS OF MULTI-LAYER WOVEN SILK FIBRE/POLYESTER COMPOSITES [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 154-162]
S., POLAT UTILIZATION OF NANOCRYSTALLINE DIAMOND POWDER IN RUBBER COMPOUNDS AS A NOVEL REINFORCING MATERIAL [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 1-7]
S., ROLC PRODUCTION OF BIMETALLIC AND TRIMETALLIC MATERIALS BY EXPLOSION WELDING AND ALLIED PROCESSES [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 48-60]
S., SRINATH TRIBO BEHAVIOUR OF POLYMER NANOCOMPOSITES (MODELLING AND EXPERIMENTS) [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 49-59]
S., TAECHAJEDCADARUNGSRI THE HEAT DEFORMATION ANALYSIS IN BRIDGE CARRIER [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 144-153]
S., TAECHAJEDCADARUNGSRI THE EFFECT OF AIR LATCH ON THE AIRFLOW IN 3.5-INCH HARD DISK DRIVE [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 369-381]
S., TASHKOV ANAYSIS AND CONTROL LAWS OF SEMI-ACTIVE VEHICLE SUSPENSION SYSTEMS WITH RENDING AN ACCOUNT OF THE PHYSICAL CHARACTERISTICS OF MAGNETO-RHEOLOGICAL DAMPERS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 15-31]
SHAHZAD, AMIR EFFECT OF VARIABLE THERMAL CONDUCTIVITY ON HEAT TRANSFER FROM SPINES OF UNIFORM CROSS SECTIONS USING HPM [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 324-333]

T

T., CHUAH H. THE MECHANICAL DESIGN AND CONSTRUCTION OF A TRUCK-MOUNTED SCATTEROMETER PLATFORM [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 23-28]
T., NIEZGODA COMPUTATIONAL AND EXPERIMENTAL STUDY OF ENERGY ABSORPTION METTER BY COMPOSITE STRUCTURES [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 87-102]
T., SALAHUDDIEN EVALUATION OF CHARACTERISTICS OF TRACKED VEHICLES TORSION BARS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 90-103]
T., TAREK MIXED-REALITY ENVIRONMENT FOR ONLINE SYSTEM IDENTIFICATION OF NONLINEAR SYSTEMS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 32-43]
T-J, YEN MORPHOLOGICAL CONTROL OF SINGLE CRYSTALLINE SILICON NANOWIRES AT NEAR-ROOM TEMERATURES [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 26-36]

U

U., UCHENNA A. INTERLAMINAR FRACTURE TOUGHNESS OF MULTI-LAYER WOVEN SILK FIBRE/POLYESTER COMPOSITES [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 154-162]

V

V., BREVERN P. THE MECHANICAL DESIGN AND CONSTRUCTION OF A TRUCK-MOUNTED SCATTEROMETER PLATFORM [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 23-28]
V., COLOMBO MODELLING AND COMPARISON OF DIFFERENT DESIGN SOLUTIONS AND EXPERIMENTAL RESULTS FOR DC TRANSFERRED ARC PLASMA CUTTING TORCHES [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 73-83]
V., D’ARCHI M. MEASUREMENT AND ANALYSIS OF TRAIN NOISE DETECTED ON A BUILDING FAÇADE. [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 58-67]
V., ESKIZEYBEK EFFECT OF LOW VELOCITY IMPACT DAMAGE ON COMPOSITE PLATES [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 1-8]
V., ESKİZEYBEK FATIGUE CRACK GROWTH OF STAINLESS STEEL FIBER REINFORCED ALUMINUM COMPOSITES [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 34-46]
V., WONG S. THE EFFECT OF RIBS ON BEHAVIOR OF NATURAL GAS VEHICLE PLATFORM BACKBONE WITH STAMPING CONSIDERATION [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 67-78]

W

W., BARNAT COMPUTATIONAL AND EXPERIMENTAL STUDY OF ENERGY ABSORPTION METTER BY COMPOSITE STRUCTURES [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 87-102]
W., DEMPSTER A COMPUTATIONAL FLUID DYNAMICS EVALUATION OF A PNEUMATIC SAFETY RELIEF VALVE [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 92-105]
W., ELMAYYAH A COMPUTATIONAL FLUID DYNAMICS EVALUATION OF A PNEUMATIC SAFETY RELIEF VALVE [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 92-105]
W., KACZOROWSKI CARBON-POLYMER NANOCOMPOSITE ON BASE OF NANOFIBER TEXTILE PRODUCED BY NANOSPIDER METHOD [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 18-25]
W., SALIH T. COMBINED EFFECT OF INCIDENCE - FOREBODY ANGLES ON THE FLOW STRUCTURE INSIDE SPIKED SUPERSONIC INTAKES [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 257-272]
W., TAZBIT RELIABILITY OF MICROELECTRONIC DEVICES FROM EMITTERBASE JUNCTION CHARACTERIZATION [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 29-37]

Y

Y., ADDAD NUMERICAL SIMULATION OF AN IN-LINE TUBE BUNDLE USING THE URANS APPROACH [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 416-430]
Y., El-Shaer THE TRANSITION FROM SINGLE TO MULTIPLE CRACKING IN CERAMIC/METAL LAMINATES [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 47-63]
Y., FUJII EVALUATION OF FRICTIONAL CHARACTERISTICS OF AEROSTATIC LINER BEARING [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 15-21]
Y., HAMAD S. APPLICATION OF CFD TECHNIQUE FOR ASSESEMENT OF ROAD TUNNEL VENTILAION [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 48-66]
Y., HASSAN M. HIGH TEMPERATURE FATIGUE BENDING PROPERTIES OF LOW CARBON STEEL [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 84-95]
Y., KHARLAMOV M. PULSED GASEOUS DETONATION GUNS FOR COATING DEPOSITION [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 9-20]
Y., NADOT COMPARATIVE STUDY OF INITIATION FATIGUE LIFE OF FREE DEFECT AND DEFECTIVE MATERIALS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 39-46]
Y., NAKAMURA APPLICATION OF PRESSURE SENSTIVE FOIL TECHNIQUE TO VISULAIZE SUBSONIC JET FLOW OVER A PLATE [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 404-415]
Y., ORLOV NONLINEAR ∞ H CONTROL OF A QUADROTOR UNMANNED AERIAL VEHICLE [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 48-57]
Y., PALA THE EFFECTS OF CENTRIPETAL AND CORIOLIS FORCES ON THE DYNAMIC RESPONSE OF A CRACKED BEAM UNDER A MOVING MASS LOAD [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 63-82]
Y., SHARAF EL-DIEN T.A. STUDY OF VEHICLE CRASHWORTHINESS APPLYING COMPOSITE MATERIALS (FRONTAL AND OFFSET IMPACT) [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 104-117]

Z

Z., AHMAD THE MECHANICAL DESIGN AND CONSTRUCTION OF A TRUCK-MOUNTED SCATTEROMETER PLATFORM [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 23-28]
Z., ROŻEK CARBON-POLYMER NANOCOMPOSITE ON BASE OF NANOFIBER TEXTILE PRODUCED BY NANOSPIDER METHOD [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 18-25]
Z., SAJURI FABRICATION OF MAGNESIUM ALLOY FROM A PRE-ALLOYED POWDER USING HOT DIE COMPACTION PROCESS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 8-17]
Z., SAJURI CHANGE IN MICROSTRUCTURE AND HARDNESS OF TI-6%AL-4%V ELI ALLOY ON TEMPERING PROCESS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 159-165]
Z., TURŇOVÁ PRODUCTION OF BIMETALLIC AND TRIMETALLIC MATERIALS BY EXPLOSION WELDING AND ALLIED PROCESSES [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 48-60]
Z., ZULKOFFLI FABRICATION OF MAGNESIUM ALLOY FROM A PRE-ALLOYED POWDER USING HOT DIE COMPACTION PROCESS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 8-17]
ZULHANIF, ZULHANIF CHANGE IN MICROSTRUCTURE AND HARDNESS OF TI-6%AL-4%V ELI ALLOY ON TEMPERING PROCESS [Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, Pages 159-165]